PERFORMANCE SOUND DEADENER
& FLOOR, ROOF, UNDERHOOD INSULATION
PERFORMANCE SOUND & HEAT DEADENER
FOIL TOP / BUTYL BACK PEEL AND STICK

PLEASE CALL FOR DETAILS & ORDERING  403-216-6060



CP1 - HEAT & SOUND                                         PLUS: APPLICATION
         DEADENER                                                            ROLLER          





CP-1 - PERFORMANCE SOUND DEADENER  
PERFORMANCE SOUND & HEAT DEADENER
FOIL TOP / BUTYL BACK PEEL AND STICK
50 SQUARE FEET, INCLUDES APPLICATION ROLLER REG. $ 199 ON SALE! $179

Viscoelastic sound deadener with a butyl based adhesive. With an aluminum
constraining layer and an unique composition with suspended mineral particles it has
been proven to be extremely efficient at the conversion of properly adhere to a
contoured panel. It can be installed anywhere including under hood.

Comes  1 foot wide and is available in 50 sq. ft. rolls.

COLOR:  Black Butyl with Aluminum Foil Outer Skin
WEIGHT: Approx. 0.32 pounds per square foot
THICKNESS: 1.50 mm ( 0.059" )
WIDTH OF SHEET:  305 mm ( 12" )
TEMPERATURE RANGE: -55C to +110C (-67F to +230F)


APPLICATIONS :
CP1 - PERFORMANCE SOUND & HEAT DEADENER can be die cut to shape and placed
onto the (typically at the sealer application operation). CP1 is used to treat metal
panels, partitions, ducts, doors, bins, panels, and so forth in Muscle Cars & Hot Rods.
It can also be used for ventilation ducts, relay cabinets, steel furniture, home
appliances, sink units, computer equipment, machine tools and many other objects that
suffer from vibration-produced noise.

INSTALLATION :
Use scissors, knife or die to cut CP1 to the desired size and shape before removing the
release liner. Next, remove dust, grease, moisture, and other foreign matter from the
application surface. Peel off the release liner. The simplest application technique is to
bend the mat slightly and attach it along its shortest edge. Press the mat firmly into
place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets,
which reduce CP1'S sound damping capacity. It is more pliable if heated with a
hairdryer or heat gun. BEWARE! It gets hot! Heat likely won't be required if installing at
or around room temperature. We also recommend sealing all joining edges with 2" wide
aluminized foil tape.
      
              
CP-1A - WIDE FOIL TAPE

USED TO SEAL JOINTS WHEN INSTALLING PERFORMANCE SOUND DEADENER.

48 MM X 45 METERS LONG.

$14.95
CP-1B - 4' X 6' UNIVERSAL SINGLE SIDED ALUMINUM FOIL
LAMINATED TO 3/8" JUTE PADDING INSULATION

INSULATES AGAINS HEAT, COLD & NOISE
USED FOR: FLOORS, FIREWALL, INNER DOORS, ROOF, UNDERHOOD, SLEEPERS,
VAN WALLS, ENGINE COVERS, GENERATOR COMPARTMENTS FOR CARS, TRUCKS,
BOATS AND AIRCRAFT.

INSTALLATION:
Use scissors or knife to cut to desired shape or size. Can lay on floor under carpet or
use contact or spray adhesive to install to vertical or overhead areas.


$49.95
CP-1BJUTE - 3' X 6' UNIVERSAL 3/8" JUTE PADDING INSULATION

INSULATES AGAINS NOISE
USED FOR: FLOORS, FIREWALL, INNER DOORS, ROOF, & HEADLINERS

INSTALLATION:
Use scissors or knife to cut to desired shape or size. Can lay on floor under carpet or
use contact or spray adhesive to install to vertical or overhead areas.


$34.95
SW602-SW611 - OE STYLE DIE CUT FLOOR SOUND DEADENER KITS

WE HAVE KITS FOR :
67-81  GM F-BODY, 62-74 GM X-BODY, 64-72 GM A-BODY, 66-74 MOPAR A, B, & E-BODY

INSTALLATION:
Lay in floor areas as originals were. No need to glue in place.


STARTING AT  $ 109
23574 - NORTON SPRAY ADHESIVE

$ 25